Magic Low Bed Frame

The Resthouse all-natural Magic Low Platform Bed Frame is the perfect solution for a sleep experience without compromising ventilation and airflow on a sturdy bed frame made in Canada.
If you are looking for a regular height or custom height sturdy bed frame, please see our Resthouse Magic Platform Bed Frame
All Resthouse magic frames are sturdy bed frames, made with untreated natural wood. Slats and rails ensure proper support, while the minimalistic design makes it perfect for small rooms or lofts. No box spring is needed and any custom sizes can be made for you. This low profile platform bedframe eliminates the need for a traditional box spring or foundation, while also making your bed frame more eco-friendly. Available in all sizes including Queen, King, California King and Full-Double XL (Full/Double extra long). Box springs are often bulky and can be difficult to move, while this low-profile platform bed is more lightweight and much easier to maneuver.

The most solid bed frame you will ever own.
Style: low profile platform bed frame
Made in Duncan, just north of Victoria, BC, Canada
Locally in house hand-made from natural wood with no stain or treatment.
A sturdy, simple and well-constructed bed frame specially designed for our unique Organic Mattresses.
Standard height of 3.75 inches, ultra-low height at 2.25 inches
Custom or European bed sizes are available on request
Easy to assemble - it's just 7 parts.
The Magic Low Profile Platform Bed Frame Consists of 7 pieces (6 pieces for Twin and TwinXL) and can be assembled by our delivery team for addresses within our delivery area.
3 - 5 week lead time, less upon request

For an alternative simple natural mattress support, see our Organic Coconut Coir Bed Rug

$449.00

Pay over time. Prequalify now

Size:

Twin

Height:

Low 3.75 in

Low 3.75 in Ultra-Low 2.25 in

Variant

Quantity:

This product is not available for shipping outside Canada.

Details

Natural, untreated spruce, pine or fir
Alternating 4” and 6” wide slats, 2" apart, head to toe for maximum support
3.75” total height from floor to top of the slats
Untreated natural wood will naturally age and will darken over time. Optionally you could stain this frame and lacquer could be applied.
If you are in our delivery area (Vancouver Island or Lower Mainland) we will typically assemble the frame for you. If this frame is shipped to you - a robson screwdriver is required, preferable electric.

Care Guide

Natural, untreated spruce, pine or fir, no special care needed.

Dimensions

win: 38 x 75 inches
TwinXL: 38 x 80 inches
Full/Double: 54 x 75 inches
Queen: 60 x 80 inches
King: 76 x 80 inches
California King: 72 x 84 inches
Height: 3.75 inches (from the floor to the top of the slats)
Clearance from the sides: 1.5 inches
Clearance from the ends - head or foot: 1.5 to 3 inches.
Custom sizing available upon request
*Custom fee may apply.

Assembly Instructions

While it is possible to assemble this bed frame with a manual screwdriver, it will be much easier with an electric or cordless screwdriver. You will need a square #2 Robertson bit - which is usually red.

The Magic low-profile platform bed frame has 7 numbered parts. To assemble, follow the sequence of the numbered parts. It is usually sufficient to only screw the centre (middle) slat to the rails using the black countersunk pilot holes. There are additional pilot holes and supply extra screws in case they are needed or you wish to add them.

1) Find pieces #1, #2 and #3 (rails with integrated legs) and place them on the floor
2) Place the outside rails such as they are inset about 1.75 inch on the sides of the slats
3) Find #4 and #5 (rounded end slats).
4) Position them so that the rounded corners are on the outside corners of the bed and that the arrows are just covered by the slat.
5) Slide the two outside rails together till they don't slide further.
6) Use the screws provided to attach the outside rails to the outside slats - use the black countersunk pilot holes.
7) Position #2 - centre rail into the centre of bed and (markings on the slats will help to position it) and again that the arrows are just covered by the slat
7) Use the screws provided to attach the center rail - use the black countersunk pilot holes.
9) 3 screws for each slat set is usually enough - use the black countersunk pilot holes.
10) Find #6 and #7 (middle slats).
11) Position so the arrows are just covered by the slats (the distance between the slats is about 2 inches).
12) Visually check that the slats are spaced equally and that they line all up.
13) Attach the middle slats (3 screws for each set of slats is usually enough - use the black countersunk pilot holes.

And yes - you will have some left over screws because we do give you some extra screws just in case you need them.

Some extra details in case you want to double check dimensions the during assembly:
1) The slat overhang on the frame sides is about 1.75 inches
2) the distance between slats is about 2 inches
3) The slat overhang on the frame ends (head and foot) is about 1.5 inches
4) The length of a Queen, King and Twin XL is 80 inches
5) The length of a California King is 84 inches
6) The length of a Twin and Full/Double is 75 inches
7) The length of a Crib is 52 inches
8) The width of a King is 76 inches (centre rail at 38 inches)
9) The width of a Queen is 60 inches (centre rail at 30 inches)
10) The width of a California King is 72 inches (centre rail at 36 inches)
11)The width of a Twin and Twin XL is 38 inches (no centre rail)
12)The width of a Crib is 27 inches (no centre rail)

Please contact us if you have any questions or require assistance.
250–597–7378, ext 1
info@resthousesleep.com

Resthouse Magic Low Bed Frame

$449.00